No 3 Folding Brownie Model A
About six years ago, I was given an old Kodak folding camera. When I opened the camera, I found a roll of film that was larger than 120 medium-format film, and the roll had been put in the camera inside out, so there was no hope of producing or salvaging any images from it. I put the camera in a drawer and didn’t give it too much thought after that–until recently. That’s when I pulled out the camera and sent pictures of it to my friend in cyberspace, Chuck Baker, the Brownie Camera Guy. Chuck is a great photographer and an expert on all things Kodak Brownie. His website is a fount of information. Chuck informed me that I have a folding Brownie No. 3, Model A (not to be confused with the Brownie No. 3A). The characteristics of the camera indicate that it was made by Kodak sometime in the two years after the model was introduced in 1905. This photo shows the camera open after I reversed the roll of film so the paper side was out. The roll of film is 122 size, which was meant to produce postcard-sized 3.25 x 5.5 inch negatives. While 122 film fits the Brownie No. 3, the camera was designed to use 124 film and produce 3.25 x 4.25 inch negatives. In any case, the expense of buying custom spooled film to fit the camera called for another solution. Chuck gave me some suggestions for using 120 film in the camera, and I gave it a try.
I encountered a few obstacles. First, everything involving film–respooling the 120 film on the longer 122 spools, loading and and unloading the camera, and loading the film on a reel for developing–had to be done in the dark. Fortunately, I had a large film-changing bag I could use. The next challenge was getting the 120 film onto the longer spools.
I wrapped rubber bands around the spools to help keep the film centered.
I wrapped rubber bands around the spools to help keep the film centered.
Since the film counter window is near the top of the camera, the numbers on the backing paper of the 120 film are not visible when the film is loaded in the camera. Note the window’s tint has changed from red to orange over time. Since the 120 film doesn’t do anything to block light leaks into the camera, I thought I should put black tape over the opening. If anyone else wants to try taking pictures as I did, I wouldn’t recommend putting tape on the faux leather covering of the camera. You can see that I pulled some of it off when I removed the tape.
If you have this query then buying viagra in usa a complete solution for Erectile Dysfunction, one can order it online and get it at his address. The condition is widely identified erectile dysfunction, male impotence, erectile condition, erection disorder and ED. levitra 40mg mastercard Where viagra online no prescriptions and Priligy together can be risky and may cause ill effects, especially when consuming higher doses, Super Kamagra is safe to consume as they do not contain any kind of side effects. Regardless of personal financial reach, it is important that you learn a little about best price for tadalafil it.
Caution: Faux leather was pulled off when I removed the tape covering the hole.
Before loading the film, I did some experimentation with a spare roll of 120 backing paper to figure out how far to wind the camera between exposures. Two full turns of the winding key seemed about right. Not knowing exactly what to expect for shutter speed, I went with ISO 50 film, figuring film speeds were probably even slower in the early twentieth century. The viewfinder wasn’t terribly useful. Below is an image of the viewfinder pointed at a well-lit bust of Abraham Lincoln. Outside,I could only get a rough idea of where the camera was aimed.
Getting a rough idea of where the camera was aimed.
As for results, I got a few exposures. One of the better ones is shown below.
A result!
Was it all worth all the effort? Probably not, but it was an interesting experience.